Industrial Technician Operations

Technicians and engineers working with machinery and robotics in modern industrial environments, highlighting equipment and technical tasks.

Young technician controlling electric energy in an industrial hall

Professional furniture production factrory worker using pneumatic hammer

Electrician working on circuitry in workshop

Marine electronic and optical company (Meob) on board an Alkmaar class Mine hunter (1983-) at work on an electronic installation in June 1989.

Man at work in a factory

USA, Delaware, Milton. Bottling station at the Dogfish Head Brewery in Milton.

engineer in a workshop working

Man examining product in a factory with colleagues in background

Man working at packaging machine in factory

close up of mechanics working on truck

Maintenance engineer operating machine while standing at factory

CAPE CANAVERAL, Fla. - At NASA's Kennedy Space Center in Florida, Pratt and Whitney Rocketdyne aerospace technician Ken Burley constructs space shuttle main engine, or SSME, #2062 in the Space Shuttle Main Engine Processing Facility. This is the last SSME scheduled to be built at Kennedy before the end of the Space Shuttle Program. Three main engines are clustered at the aft end of the shuttle and have a combined thrust of more than 1.2 million pounds. Each engine utilizes liquid hydrogen for fuel and liquid oxygen as oxidizer and operates during the entire eight-and-a-half minute ride to orbit. Post-flight inspections and maintenance of each engine also are conducted in the SSME Processing Facility between shuttle missions.

Top view of two colleagues working at industrial robot in modern factory

Mature man holding automatic welding torch while colleague operating control in factory

Man working in modern factory

car service, repair, maintenance and people concept - auto mechanic hands with digital multimeter testing battery at workshop over snow. auto mechanic hands with multimeter at car

Electrician fitting a ventilation system

Young engineer holding grinding disc

Rolls-Royce aircraft engine production, assembly and check of fans for the BA710 engine, Dahlewitz, Blankenfelde-Mahlow, Brandenburg, Germany, Europe

Mechanic man using a wrench to Repair or maintain the drive motor at machine

Engineer and inspector measuring voltage in a substation

Two technicians controlling machines

Male owner operating control panel while standing in factory

Young male engineer working in an industrial plant, Freiburg Im Breisgau, Baden-Wºrttemberg, Germany

Close-up of man holding workpiece in industrial factory

Nehlsen-BWB Flugzeug-Galvanik Dresden GmbH & Co. KG

Employee drilling. Metal drilling. Metal workshop

Maintenance engineer operating robotic CNC machinery in manufacturing factory

Lockheed Martin team completes the closeout weld of the pathfinder pressure vessel at NASA's Michoud Assembly Facility in New Orleans on Nov. 15, 2015. The pathfinder welds demonstrated the tools and processes required to safely perform the 7 welds required to assemble the pressure vessel for Artemis I. Part of Batch image transfer from Flickr.

The worker works on the machine. Press for rubber penis. The worker works on the machine. Press for rubber penis. Processing of rubber products for sex shop on the machine. Mold for the product. Rubber penis Copyright: xZoonar.com/NikolayxZirovx 16569334

Men looking at metal shaft and hoses

Rear View Of Male Engineer Operating CNC Machine In Factory

KENNEDY SPACE CENTER, FLA. -- In the hypergolic maintenance facility at NASA's Kennedy Space Center, a technician adjusts equipment during testing of the Ares I-X Roll Control System, or RoCS. The RoCS Servicing Simulation Test is to gather data that will be used to help certify the ground support equipment design and validate the servicing requirements and processes. The RoCS is part of the Interstage structure, the lowest axial segment of the Upper Stage Simulator. In an effort to reduce costs and meet the schedule, most of the ground support equipment that will be used for the RoCS servicing is of space shuttle heritage. This high-fidelity servicing simulation will provide confidence that servicing requirements can be met with the heritage system. At the same time, the test will gather process data that will be used to modify or refine the equipment and processes to be used for the actual flight element.

Licensed serviceman using electric drill to fix system issues caused by faulty expansion valve. Skilled expert working on damaged condenser requiring professional intervention

Young man working in workshop

Man working in a modern factory operating a machine

Engineer Operating Computer Controlled Lathe

Technicians using tablet PC standing in industry

portrait of young apprentices operating machine in factory

NASA engineers install test hardware for the agency's new heavy lift rocket, the Space Launch System, into a newly constructed 50-foot structural test stand at NASA's Marshall Space Flight Center. In the stand, hydraulic cylinders will be electronically controlled to push, pull, twist and bend the test article with millions of pounds of force. Engineers will record and analyze over 3,000 channels of data for each test case to verify the capabilities of the engine section and validate that the design and analysis models accurately predict the amount of loads the core stage can withstand during launch and ascent. The engine section, recently delivered via NASA's barge Pegasus from NASA's Michoud Assembly Facility, is the first of four core stage structural test articles scheduled to be delivered to Marshall for testing. The engine section, located at the bottom of SLS's massive core stage, will house the rocket's four RS-25 engines and be an attachment point for the two solid rocket boos

Condenser engineer on call with customer

Engineer performing maintenance on medium voltage cell in wind turbine tower

Automatic assembly line for production of shock absorber

Worker holding machinery in manufacturing plant

Male technician with paper fixing drill bit in machine at factory office

Man examining product in a factory

Mature male technician analyzing machinery at factory

Technician on call reporting freon leaks

Man operating machine in industrial factory

An employee of the Heidelberger Druckmaschinen AG mounting the side wall of an offset printing press by the Heidelberger Druckmaschinen AG in Wiesloch near Heidelberg, Baden-Wuerttemberg, Germany, Europe

Vintage Photograph. Inspecting fire suppression system for workplace safety compliance.

Apprentice electrician works on an industrial power distribution center while his supervisor looks on.

Workers in computer recycling plant dismantling hard disk

Engineers from NASAs Armstrong Flight Research Center and Empirical Systems Aerospace prepare a cruise motor controller, planned to be used on NASAs all-electric X-57 Maxwell, for vibration testing at Armstrongs environmental lab. Testing the cruise motor controller at various vibration levels, based on baseline flight testing in the projects first phase, helps ensure that the hardware will withstand similar vibration in flight conditions. X-57, NASAs first all-electric experimental aircraft, or X-plane, will fly in its first all-electric configuration in 2020.

Man with assembly robot in factory

Two men in factory at a steel drill machine

Europe, Italy, Lecco. Sanelli-Montana knife factory in Premana in Valsassina.

technician fixing a complex machine

tennis racket chordate, Majorca, Balearic Islands, Spain.

Coworker looking at man pouring beer from storage tank in factory

Technician explaining about machine to trainee in industry

Work continues on the Exploration Flight Test-1 (EFT-1) Orion crew module in the Operations and Checkout Building (O&C) at Kennedy Space Center on March 21, 2013. Part of Batch image transfer from Flickr.

Repair work in the electric flap. electrician handles the equipment in the electric flap with his hand in the glove. Repair work in the electric flap. The electrician handles the equipment in the electric flap with his hand in the glove. Copyright: xZoonar.com/DenisxPomortsevx 15844294

JOE MIRANDY, ET20, PREPARES SENSORS ON THE POGO Z- BAFFLE AND BELLOWS PRIOR TO FLOW TESTING. THE SENSORS WILL MEASURE VIBRATION AS FUEL FLOWS THROUGH THE TUBE AND BAFFLE.

student electronic repairman welding circuit

Maintenance engineer operating CNC machine in modern factory

Maintenance engineer in protective workwear checking machine part in modern factory

Viviers d'Emeraude, Breton myticulturists in the Bay of Saint-Malo. Saint-Jacut-de-la-Mer on 01/06/2020.Viviers d'Emeraude, myticulteurs breton dans la baie de Saint-Malo. Saint-Jacut-de-la-Mer le 01/06/2020.

Woman opening door of turbine

Technician operating machine in modern factory

teaching the drop saw features

Man wearing ear defenders working with spools in factory

alcohol production, business and people concept - man with hose working at craft beer brewery kettle. man with hose working at craft beer brewery kettle. man with hose working at craft beer brewery kettle

Technician use thermal imaging camera to check temperature in factory

Beer production at the Qajaq brewery, Narsaq, Greenland

Man at terrestrial heat heating, low-energy house, Kleinmachnow, Brandenburg, Germany, Europe

Engineer And Apprentice Using Computerized Cutting Machine

Worker working on electronic parts during the final assembly of a bottling plant, Krones AG company, Neutraubling, Bavaria, Germany, Europe

Specialist lecturer and Master Craftman for plumbing student in the heating, ventilating, and air conditioning, HVAC laboratory, controlling a gas boiler, Master Craftman School of the Chamber of Small Industries and Skilled Trades, Dusseldorf, North Rhine-Westphalia, Germany, Europe

Male entrepreneur concentrating while analyzing machine part in manufacturing factory

Focused engineer repairing robotic arm in industry

Richard Schnell, 846th Test Squadron machine tool operator, operates a fadal vertical milling machine at Holloman Air Force Base, New Mexico, Jan. 10, 2024. The fadal creates 3D holes in blocks used to assemble materials needed for the 846th TS, safety testing and weapons utilized by the Department of Defense.

Skilled worker, working in conveyor belt shop

Mechanic disassembling a compressor engine

Instructor assisting apprentices working at lathe in workshop

Male manager drilling metal while training female worker in metal industry

production, manufacture and woodworking industry concept - worker hand sprays urethane finish or polish to board at furniture plant workshop. worker hand sprays urethane finish to board. worker hand sprays urethane finish to board

Man operating cutting machine in workshop

Apprentice mechanic for agricultural and construction equipment, training on a fertilizer machine in a workshop, Kleve, North Rhine-Westphalia, Germany, Europe

Day one of Repair Technology Exercise (REPTX) at NSWC PHD on March 21.

Smiling male manual worker standing by machinery at industry

A training supervisor showing an industrial mechanic apprentice how to wedge a workpiece in the machining centre of the Heidelberger Druckmaschinen AG in Wiesloch near Heidelberg, Baden-Wuerttemberg, Germany, Europe

Young mechanic taking tool from tool box, close up

Plumbing, pipes and maintenance with man in kitchen for repair, industrial and inspection. Handyman, tools and safety with male plumber fixing sink for home improvement, drainage and water system

MTU Aero Engines GmbH: production of the Tiger combat helicopter engine, MUNICH, GERMANY.

manufacture, business and people concept - men with clipboard and malt working at brewery or beer plant kettle. men with clipboard at brewery kettle or beer plant

U.S. Air Force Senior Airman Zachary Walsmith, 18th Civil Engineer Squadron electrical systems journeyman from Amarillo, Texas was selected as the 18th Wings Airman of the Week at Kadena Air Base, Japan. The Airman of the Week program is an opportunity for outstanding Airmen to be recognized by KAB leadership as well as showcase these young leaders to their peers.

Impulstec GmbH, Radebeul, Saxony, Germany, Europe

Engineer operating control panel in substation control room

teenage apprentice operating machine in factory

Factory, machine and man in warehouse, maintenance for industrial safety and service with employees together. Mechanical engineering, production monitoring system or plastic injection and moulding

of 3