← Objects / Still Life

Mechanical Models and Tools

Detailed images of historical mechanical models including a tangent sight and half models of ships, showcasing craftsmanship in metal and wood.

Wanderer Werke Ag, Continental typewriter used by Françoise Fox-Schmidt (attributed title), 1940. Metal, leather. Museum of the Liberation of Paris - General Leclerc Museum - Jean Moulin Museum.
Wanderer Werke Ag, Continental typewriter used by Françoise Fox-Schmidt (attributed title), 1940. Metal, leather. Museum of the Liberation of Paris - General Leclerc Museum - Jean Moulin Museum.
159 assets in this story
Tangent sight. Set up or dirt that is mounted against the rear of the lock hardener, identical to MC-1889-24-b. The aid is equipped with a hook that grabs into a slot hardener in a square notch, and is tightened with a screw from behind. A short square iron rod, on top of pyramid-shaped with grooves through the top; Can move vertically back and forth. The mounting rod has two scales on opposite sides, one going from 0 to 5, the other from 0 to 4.5.Model of a Mast Cap, anonymous, c. 1780 - c. 1840 demonstration model Model of a donkey head consisting of four parts: the block resting on the mast with four eyes at the bottom, the calf that locks the steng and two side pieces. Between the side pieces and the main block there are recesses for a total of four discs for the stena sturds, which replace the stenwear pipelines. Netherlands wood (plant material). brass (alloy)Half Model of a Pilot Vessel, anonymous, c. 1840 ship model. half model. builder's model Block model (port) of a two -master. On the three shutters and a cover structure. Elliptical gate, closed. The Zeeg is almost flat. V-shaped underwater ship, very sharply wiped backwards. Both masts hell back. United States of America wood (plant material)Half Model of an Ironclad Ram Ship.Stacking model and semi-model (starboard) of a ram tower vessel. It has a ramsteven, cruiser gate, stir with rounded stirring blade, a propeller shaft of a few screws: the screw is missing. There are two gunpins and three masts on the deck. The seam is completely flat, the hull has an almost flat bottom with round kimps. With pencil a larger stirring blade is indicated on the back plate.Model of a four-legged gin, anonymous, c. 1750 - c. 1800 scale model Model of a four -legged fortress. The lifting spindle is driven by a worm wheel operated with a pendulum. The bronze gun model hanging on the hoist. Netherlands iron (metal). wood (plant material). ropeLoop.Wanderer Werke Ag, Continental typewriter used by Françoise Fox-Schmidt (attributed title), 1940. Metal, leather. Museum of the Liberation of Paris - General Leclerc Museum - Jean Moulin Museum.Studio shot of old-fashioned itemDouble-Anastigmat lens by Carl Paul Goerz, 60 cm focal length f/11, with 7 slope, glass, brass frame, wooden lens standard, circa 1896.Half Model of a 22-Gun Sloop of War, anonymous, before 1781 ship model. half model. builder's model Polychromed mold model (starboard) of a three -mast. Striking is the large number of clamps. No guns; Half deck and baking deck indicated by Gillingen. Get mirror, Hol Wulf, no details of the fence, no side gallery; Straight with square stirring king. Seeping a little rising and behind, one bark wood and one reehout. Peaked around. Scale 1:44 (scale on model). model maker: Netherlands (possibly)after design by: France wood (plant material)Model of a Paddle Wheel, anonymous, 1834 demonstration model Model of a scoop wheel with nine moving plates. The model is painted black and white. An eccentric wheel, walking on three small wheels against the ship's wall, moves the plates, each mounted on its own axis. The model can be moved with a crank. Scale 1:20 (derived). Netherlands wood (plant material). brass (alloy). iron (metal)Model or a 30-pounder CARRONADE ON DECK. Model of a 30-pound carronade on a shade part, incomplete. The wooden loop is 14 cm long and not exchanged. It has an elevation screw through the grape. The top piece has a slightly trapez-shaped body with brass attachment and rings, the front and back are rounded. Against the back the baking koker in brass fittings and on top of the trail for the elevation screw, on the front the ears with tapas and the swirl bolt running into the slot of the underled. The underled is a wooden window, rounded at the front, partly with brass caps and equipped with two bolts. On the back the underled widens and a little has been completed. In the middle and rear, the window is supported by bobbins with wheels: the wheels in the middle run in the longitudinal direction; The wheels are behind with their axes radially compared to the spindle bolt. The ship's part has two different gates: one has a platform on the inside and a round opening valley, the other has a plTwo-piece bronze mold for bowl, cast molding tool tools base metal bronze iron wood, cast twisted Two-piece bronze mold for casting bowl Rotterdam tin foundry tin stainer tin Meeuws Druy craft Shapes are from the originally 18th century Rotterdam tinnegieter J Druy. The large molds that were not signed or dated were the property of the tinker guild and were rented to the small tin caster.Grzebień. unknown, authorAntique Swiss lock.Model of a Rudder that Can Be Jacked-Up, Speleveld, c. 1782 - c. 1803 demonstration model Model of a stern with rudder with square roser king. The helm has a hole for one stirpen and five stirring irons. The hole in the upper fingering is closed and the stirring hook has been replaced by a bolt with which the rudder can be boosted. Flushing wood (plant material). brass (alloy). A lock plate with robbery. Gothic.Four-piece mold for collar or top of pot or jug, mold casting tool tools equipment base metal cast iron wood iron, cast turned Four-part cast iron mold for collar or top of pot or jug Rotterdam tin pourer tin casting tin casting Meeuws Druy craft Shapes are from the originally 18th-century Rotterdam tinnegieter J Druy. The large molds that were not signed or dated were the property of the tinker guild and were rented to the small tin caster."Travel camera made of wood, measuring 13 x 18 cm, produced by Rudolf Lechner (Wilhelm Müller) after 1877, including lens, body, viewfinder, and folding mechanism."old ironAntique photo camera Old antique photo camea isolated over white background Copyright: xZoonar.com/IvonnexWierinkx 7547025Padlock with key, c. 1400 - c. 1950 Padlock, very composite, with key. Marked. iron (metal) Padlock, very composite, with key. Marked. iron (metal)Half model or a 68-gun ship of the line.Polychromed mold model (starboard) of a three-master. No gunpaints and decks indicated, except the semi-deck. Wrecked mirror, hollow wulf, no fence or side gallery; Stir straight with square roofing. Pretty flat sea, two mountain wooden and one Reehout. Pretty sharp underwater ship. Scale 1:50 (Scale by model).Block, Rijkswerf Willemsoord, 1865 block A 26 cm two -disc grenade block according to the regulations of 1865, with iron wire strop; The binding is of rope, the block has an iron stocking and a hook. den Helder wood (plant material). iron (metal). rope. leather. linen (material)This object woodlike building material. Used especially for home windows. Half Model of an Ironclad Monitor.Stacking model and semi-model (starboard) of a ram tower vessel. It has a Ramsteven, cruiser gate, stir with rounded stir sheet. On the deck there are two deck homes, a front and a rear, both triangular in form so that they allow a maximum shot field for the dome midship. A chimney on the rear deck house. The seam is completely flat, the hull shape is a flat bottom.Button of faceted transparent press glass with a button of lilac cloud glass in the middle, a metal eye at the back, c. 1905 - c. 1925 Button of faceted transparent press glass with a Lila Cloud glass button in the middle, a metal eye on the back. Europe glass. metal Button of faceted transparent press glass with a Lila Cloud glass button in the middle, a metal eye on the back. Europe glass. metalBrown wooden school bag with carved flower border, schoolbag bag wood metal, child school educationIron sheet fender lock with rectangular lock plate, one lap and curl, door lock padlock lock closing device iron, handforged riveted hingesGunlock (Percussion).Adjustable percussion lock on a small wooden board, which represents the lock hardener. The lock consists of three main components: the hammer, the mounting plate and the spacer with impact pipe. The mounting plate is an L-shaped piece of iron with a mouth for the hammer on one side and a bolt for mounting the spacer to the other. In the overhanging piece it has two holes for the bolts with which it is banned to the lock hardening; One of these holes is oval, so that the bolts can vary in distance relative to each other. The hammer is slightly oblique to hit the impact pipe that comes next to the attachment plate. The egg-shaped head slides over the shaft and is fixed with a wing nut at the desired position on the shaft. The sides of the head is slightly eroded. The retraction rope runs through the mouth under the axis of the hammer backwards and has a wooden handle. The spacer is a flat piece of iron, in the middle with an emerging arc on which the impact pipe is Model of a four-legged gin. Defensive artillery was extremely heavy as a rule and therefore not very mobile. However, heavy artillery could be moved and placed on a mount, such as a gun carriage, using a gin - a kind of hoist. There was also a more mobile version of this hoist, the field gin (on display nearby).Half Model of a 14-Gun Brig.Polychromed mold model (starboard) of a tweemaster. Wrinkled mirror, hollow wulf, no details of fence or side gallery; Stir straight with square roofing. Side in front and behind something ascending, one bark wood. Something peaked around. Scale 1:30 (Scale by model).Close-up of a rubber stampPercussion Lock for gun, Anonymous, 1830 - 1860Dulcimer 1749 Giovanni Antonio Berera Italian. Dulcimer 501612Half Model of a 28-Gun Sloop of War.Polychromed mold model (starboard) of a three-master. Thirteen gunposes on one deck, no other decks indicated. Wrecked mirror, hollow wulf, no details of the fence, no side gallery; Stir straight with square roofing. Side in front and behind ascending, two bark wood and one Reehout. Peaked round trip. Scale approx. 1:36 (derived).Red vintage electrical fuse. SwitchboardOld manual meat grinder on a wooden tableModel of A Paddle Wheel. Model of a scoop wheel with nine moving plates. The model is black and white painted. An eccentric wheel, walking on three small wheels against the ship's wall, moves the plates, each of which are mounted on your own axis. The model can be moved with a crank. Scale 1:20 (derived).Hurdy-Gurdy.Crakeer with six strings, ten ivory and thirteen ebony keys. Two separate parts in a separate bag.ARQUETA: DE SAN MARTIN I EL HUMANO. (DEPOSITO: MUSEO ARQUEOLOGICO NACIONAL).Sled No.2. Joseph Beuys (1921-1986). Wood, felt, fat, painted steel, cotton cord, cotton straps and flashlight. 40.6 x 90.2 x 35.5cm.Child holding a brown color wooden toy chair on white backgroundLesser of a Hakkeboord, Antonio Battaglia Fabbricatore de Saltery, 1769 Malib ebony (wood) Malib ebony (wood)Half Model of a 70-Gun Ship of the Line, anonymous, c. 1750 - c. 1800 ship model. half model. builder's model Polychromed mold model (starboard) of a three -mast. No guns and no decks indicated; Halfdek and baking deck are distinguished by the Gillingen. Get mirror, hollow wulf, no fence, side gallery or rudder. Almost flat Zeeg, two mountain wood and one reehout. Quite sharp underwater ship compared to the previous models. Netherlands (possibly) wood (plant material)Japanese drumold-fashioned coffee grinder Old-fashioned coffee grinder with wheel Copyright: xZoonar.com/IvonnexWierinkx 7573748Box in three sections 18th-19th century Japan. Box in three sections 58358. Rooster for a charcoal iron, consisting of three bars in scalloped sawn edge. Note: Belongs to iron (BK-NM-1010-260-A).An old style aircraft sextant on display at the Air Training Command undergraduate navigator school. Base: Mather Air Force Base State: California (CA) Country: United States Of America (USA)Iron with uprights handle in the form of female hermes, anonymous, c. 1750 The internal with a piece of cast iron -weighted object consists of a bolt of iron, a decorative plate and two cast handle parts of yellow copper and a beuke wood handle. The bolt has a valve at the back, which can be opened and closed. An S-shaped piece of iron has been forged on the bottom plate of the bolt, on which the loose piece of iron is located. The decorative plate has a cut and engraved decor with, among other things, a crown, two birds, a double moniogram JM and a heart. The two handle parts are made up of a curl decorated with rocailles, which turns bobbenaan into the bust of a woman. Nuremberg Iron (Metal). Ornamental board and handle parts: Brass (Alloy). Handle: Beech (Wood) casting / forging / cutting / engraving The internal with a piece of cast iron -weighted object consists of a bolt of iron, a decorative plate and two cast handle parts of yellow copper and a beuke wood handle. The bolt has aHalf model of a paddle steamer, Rijkswerf Rotterdam, c. 1846 - c. 1848 ship model. half model. builder's model Polychromed, fully planked Mallen model (starboard) of a two -mast paddling steam ship. The model has only one gun gate, but at the front and aft deck also Valpoorten for guns on rotators. The Schegbeeld is a gilded curl. Elliptical fence with national weapon; Stir with round stirring king (American rudder) and rounded Roerblad. Radio cabinet covered with inverted lifeboat; Before and behind the radio cupboard grilles; On deck a chimney. Completely flat siege. Stretch around. Scale 1:40 (Obreen). Rotterdam wood (plant material). brass (alloy) Rotterdam. East-IndiaRoman bronze armourscalesVase for small glasses. Zielenkiewicz, Antoni (fl. ante 1785-ca 1790), goldsmithModel of A Paddle Wheel. Model of a scoop wheel with six moving plates. The model is black and white painted. The scoop wheel consists of spokes and plates. A circular rail with the same diameter if the scoop is made eccentrically relative to the shovel wheel against the ship's wall. The axis of each plate is provided with a stool that runs into the groove of these rails and so leaves the plates. The model can be moved with a crank. Scale 1:20 (derived).Model of A Ship's Galley. Model of a ship bowl for the head deck, painted black. It is a simple cube with iron walls, standing on paws that have a hole to be screwed into the deck. The galley has double doors with a slide and lock. The floor has two levels, behind slightly higher than for; At the front is a grid with movable irons. The roof is oblique with a chimney behind. Confirmed within its hooks against the walls, to which necklaces can be hung.Oil lamp from the 19th century, exhibition "Feuer und Flamme", The Fire Brigade from 1850 until today, Industrial Museum, Lauf an der Pegnitz, Middle Franconia, Bavaria, Germany, EuropeTwo-piece bronze mold for screw cap of bottle or jug, mold casting tool tools kit metal_metal bronze, cast turned Two-piece bronze mold for pouring screw cap of bottle or jug with round recess at the top and an octagonal two millimeter thick rim the bottom. With hand-forged nail fastened in the handle. The handle is slightly damaged bottom: 2834 28 Rotterdam tin tinker tin tin Meeuws Druy artisan Shapes are from the originally 18th century Rotterdam tinnegieter J Druy. The large molds that were not signed or dated were the property of the tinker guild and were rented to the small tin caster.Lid to the chest and key; 1 XIX W (1801-01-01-1825-12-31);Case with three glass viles for alcoholModel or a Breech-Loading Gun. Model of a long rear charging gun of 24 pounds on ship's part, incomplete. The loop is 29 cm long and has a 14 mm caliber. A wedge right through the kulas holds the locking piece in place; The final piece consists of the entire kulas and the bottom of the room, wedge-shaped cut out. This part is missing. Scale 1:10 (estimation).Antique iron, aged 1900, from Germany, currently in an Italian collectionGoldweight Pierced Brass Finial with Swelling Terminals..., 19th-20th century, 2 5/8 x 13 1/8 x 1 in. (6.67 x 33.34 x 2.54 cm), Brass, Ghana, 19th-20th centuryOld weight against a old backgroundRookstel, anonymous, c. 1400 - c. 1950 Smoking set, 'device for smoking'. lacquer (coating) Smoking set, 'device for smoking'. lacquer (coating)Frank Wenger, Clock, 1935 1942 ClockRain Cap for the Elevating Screw of a Carronade. Raindop for the elevation screw of a carronade. It has a cylindrical body with convex closure above and trumpet-shaped base, which has a cut out for the kulas and two holes for bolts, with which the cap has been mounted on the gun. Around the body a large, loose ring is applied, which shields the bolts of the rain and can easily be lifted to reach them.Orthoscope 3, No. 501 by Gebr. Schulze, with iris blends (divisions 12-100), in glass, brass, and wooden frame, produced in 1895. Designed for precise optical imaging and photographic use.Cricket Cage (Italy); wood, metal wireLock register; XVII-18th century (1601-00-00-1700-00-00);Two-piece bronze mold for lid of pot or jug, cast molding tool tools base metal bronze, cast twisted Two-piece bronze mold for casting lid for pot or can top, Rotterdam tin foundry tin stain tin Meeuws Druy craft Shapes are from the originally 18th-century Rotterdam tinnegieter J Druy. The large molds that were not signed or dated were the property of the tinker guild and were rented to the small tin caster.Knife, fork and cutting board, salt, pepper and other ingredients Knife, fork and cutting board, salt, pepper and other ingredients located on a textured concrete background Copyright: xZoonar.com/TetianaxChernykovax 21413830Model of a Grapnel. Model of a four-armed dredge in a wooden box, lined with black sheet and decorated with a brass ball on top. The DREG has a ring at the top of the shaft; The shaft is reinforced at the crown.DoorlatchHalf Model of A 74-Gun Ship of the Line, Anonymous, Rijkswerf Vlissingen, 1831 ship model. half model. builder's model Polychromed mold model (starboard) of a three -mast. Forty -six gun gates on three decks. The Schegbeeld is a torso by Michiel de Ruyter, harnessed. A lion's head on the crane bar. Safe with elliptical fence and side gallery of two floors, decorated with curl work, westergang and government weapon against the fence; Straight with square stirring king. The Zeeg is almost flat, one barkhout. Peaked around. Scale 1:50 (derived). model maker: Netherlandsmodel maker: Flushingafter design by: Flushing wood (plant material). brass (alloy)Old vintage retro compass isolatedCast iron grill black steel texture lines patternKitchen grater, kitchen cheek, Raffel, Raffeln, Raspel, Raspeln, grater, grater, rubbing ** grater, graters 647-FGAAn old-fashioned pacemaker.Antique cast iron with a bird figurine and a wooden handle on a brown backgroundCopper DeskLamp. Maker: Rick E. Neacili, AmericanFolding key. Folding key whose handle overpipes and beard folds.Scythian Art by anonymous artist, bronze, 2th century BC, Russia, Moscow, State History MuseumHalf Model of a 74-Gun Ship of the Line.Polychromed mold model (starboard) of a three-master. No guns; Baking deck and semi-deck can be distinguished by gillings. Two sloops on the bow. Wrecked mirror, hollow wulf, no fence or side gallery; Stir straight with square roofing. Pretty flat sea, two mountain wooden and one Reehout. Pretty sharp underwater ship. Scale approx. 1:55 (Scale by model).Rusty door bell with broken buttons and name plates. Vintage doorbell buzzer grungy background.Gun Sight. Brass design or visor, consisting of two vertical rods between which a visor slides up and down. On one side, the rods have a scale ranging from 8 to 14; On the side a bowl is applied from 4 to 8. The visor has a round foot with a horizontal ridge; Originally a chain was also attached to the visor, coupling it to the affit. This visor was for field gun; The inscription strikes a 15 cm houwitzer, long model.Three Models of Guns On Slides And Pivots Of A Coastal Battery.Drie Models Of Cannons On Raads, from a Coastal Battery, Incomplete. The sleds consist of a rectangular frame with brass fittings, the beams in the longitudinal direction with up ends, lying on a long crossbar in the middle; The spindle bolt is arranged in the middle of this crossbar. By screwing it through the beam, the affuit is lifted on the spindle bolt. The frames have wheels on the corners and the ends of the crossbar, the axes of which are radial with respect to the spindle bolt. The top charfuits consist of two cheeks with three stages, connected by a slant calf, a crossbar, the soleplate and three bolts cross over. The Stelwig has been replaced by an elevation screw on which a metal spring lies. The axles have been replaced by round shafts across the cheeks, which slide over the carriage: the front axle has holes for hand gourds, with which the oFFuit is backed up. The wooden run have an average length of 22.5 cm aPair of Stirrups with Warming Box 19th century French Each footplate of these stirrups is featured with an openable pierced box where hot charcoals were placed in order to keep the riders feet warm in winter.. Pair of Stirrups with Warming Box. French. 19th century. Iron alloy. Equestrian Equipment-StirrupsHalf Model of a Koff.Polychromed mold model (port) of a three-master. The large number of spans is striking. The skin above the bark wood is closed. Round stern; Stir stir with helmet rack over the deck. The seam runs to both ends, one bark wood. Running with flat bottom. Scale approx. 1:36 (derived).Old drawing tools in a box on a green backgroundbroche de cinturon visigodo,necropolis de carpio de Tajo, Museo de los Concilios y la Cultura Visigoda, Iglesia de San Román,Toledo, Castilla-La Mancha, Spain.Suitcase made of wood with beautiful iron fittings, covered with cut leather, anonymous, c. 1475 - c. 1500 Suitcase made of wood with beautiful iron fittings, covered with cut leather. Ribbon -shaped decoration, in which on the lid "M.A.M.A.". A monster on either side of the lock. On four iron balls. With key. wood (plant material). iron (metal). leather Suitcase made of wood with beautiful iron fittings, covered with cut leather. Ribbon -shaped decoration, in which on the lid "M.A.M.A.". A monster on either side of the lock. On four iron balls. With key. wood (plant material). iron (metal). leathersteel door locks on white doorHalf Model of a Merchantman, anonymous, c. 1780 - c. 1820 ship model. half model. builder's model Polychromed mold model (starboard) of a three -mast. No decks or gun gates indicated. The model has a railing. Get mirror, Hol Wulf, no details of fence or side gallery; Straight with square stirring king. Seeping forwards and backwards, one bark wood and one reehout. Peaked around. Scale approx. 1:40 (derived). Netherlands (possibly) wood (plant material)Spinning wheel, anonymous, 1750 Spinning wheel of rosewood. The tripod, the steps and the sports and bars show twisted sections. A six -pointed star is inlaid in the leaf, with walnut and other types of wood. The bars are crowned by twisted ivory buttons. Northern NetherlandsNetherlands wood (plant material). rosewood (wood). beech (wood). pear (wood). ash (wood). walnut (hardwood). ivory. iron (metal) Spinning wheel of rosewood. The tripod, the steps and the sports and bars show twisted sections. A six -pointed star is inlaid in the leaf, with walnut and other types of wood. The bars are crowned by twisted ivory buttons. Northern NetherlandsNetherlands wood (plant material). rosewood (wood). beech (wood). pear (wood). ash (wood). walnut (hardwood). ivory. iron (metal)Miquelet Lock, late 1600s. Spain, late 17th Century. Steel, inlaid with gold and silver; overall: 11.8 x 10.8 x 3.2 cm (4 5/8 x 4 1/4 x 1 1/4 in.).Leather Glove, Brass, leather, In the form of a light brown leather glove, the leather tooled to simulate stitching. Lid hinged on bottom side. Striker on brass plaque on bottom., late 19th century, containers, Decorative Arts, Matchsafe, Matchsafe"Wooden travel camera measuring 13 x 18 cm, produced by Heinrich Feitzinger between 1870 and 1890, including lens, folding body, and viewfinder for photographic use."Temple of Vesta, Tivoli Architectural Model; Italy; pressed, carved, and cut cork with wood base